Facebook

Naim Hi-Line 5p DIN – 2 RCA

64884
64885

Omschrijving

Naim Hi-Line interconnect

During the development of the CD555, a special project ran in parallel; to develop a new signal cable that would exceed the performance of Naim’s standard cable.

The brief was to investigate all parameters of a signal carrier; to improve the whole rather than just improving the cable as is the more normal development practice.

Given the opportunity to start with a ‘clean sheet’ the R&D team decided to develop a much improved plug as well as a new cable. The Hi-Line is available in the following variants: 5 pin DIN to 5 pin DIN, 4 pin DIN to 5 pin DIN, 5 pin DIN to 2 RCA, 2 RCA to 5 pin DIN and 2 RCA to 2 RCA.

The Hi-Line Air-PLUG (patented) is designed as a decoupling device to prevent vibrations from one product being transmitted, through the cable, to another product and to stop airborne vibrations picked up by the cable being transmitted to the products to which it is connected. The many different rear sections of the Air-PLUG are clipped together to form a lossy flexible section. The cable is clamped compliantly to the end of this flexible section. Other detail elements of the Air-PLUG include: a significantly reduced metal content to lower electromagnetic effects; a design to reduce eddy current effects and a cable clamping mechanism that does not squash the cable and affect its impedance.

The cable section of the Hi-Line also benefited from a complete re-think. It had to be low capacitance, low resistance and flexible. It had to work superbly in DIN to DIN connections but it also had to perform when used in other configurations. The cable, exclusive to Naim, is manufactured from twisted pairs of 80 Litz conductors surrounded by PTFE, Kapton and PTFE tape all then enclosed within a semi conductive shield to reduce static charges. This is then wrapped by two spiral wound copper shields and lapped PTFE tape. Two of these assemblies side by side are then wrapped in layers of PTFE tape and finally a rubber outer covering. This gives a two-channel cable where the signal and RF grounds are held in a static position relative to each other negating any difference in field between them.

Specificaties

Algemeen

Kabelopbouw
DIN (5 pin) naar 2x RCA male
Lengte
1,0 meter
Kwaliteitsklasse
High-end klasse
Kleur
zwart

Ervaar het geluid
Plan je demo

Voor de echte beleving ben je van harte welkom in de luisterruimtes en experience rooms in onze vestigingen.

Vul onderstaand formulier in en wij houden rekening met je komst!

"*" geeft vereiste velden aan

DD dash MM dash JJJJ
Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.

Inruil
Aanvraag

Inruil aanvragen

"*" geeft vereiste velden aan

Inruil aanvraag

Naam*

E-mail*

Beschrijf zo nauwkeurig de staat van het apapraat en indien bekend de leeftijd. Geen aan of de orginele verpakking en accessoires nog aanwezig zijn.
Sleep bestanden hierheen of
Max. bestandsgrootte: 120 MB.

    1.099,-

    stuk
    Bestelbaar
    Bekijk winkelvoorraad

    Winkelvoorraad

    Naim Hi-Line 5p DIN – 2 RCA

    Naim Hi-Line 5p DIN – 2 RCA

     1.099,-

    iEar' | Tilburg

    st. Ceciliastraat 28,
    5038 HA Tilburg

    4 tot 20 dagen levertijd

    iEar' | Amsterdam

    Beethovenstraat 9-b,
    1077 HL Amsterdam

    4 tot 20 dagen levertijd

    Verlanglijst

    Heb je al een iEar' account? Log dan in of maak een account aan om producten aan je verlanglijst toe te voegen.

    Registreren

    Je persoonlijke gegevens worden gebruikt om je ervaring op deze site te ondersteunen, om toegang tot je account te beheren en voor andere doeleinden zoals omschreven in onze privacybeleid.

    Reviews & Awards

    Ervaringen van klanten

     1.099,-

    Toegevoegd aan winkelmand

    Items in je winkelmand

     ×
    Afrekenen

    Aanbevolen accessoires